The guide expresses the effect of traffic loads on pavement performance using the concept of axle Load Equivalency Factors (LEF). LEF is regarded as a pavement damage factor assigned to each specific load and axle configuration. The size of LEF is related to the damage that is expected to occur from a standard load of 80 kN carried by a single axle with dual tires. The factors are summarized to yield the number of Equivalent Single Axle Loads (ESALs) a pavement is expected to sustain during its life. A summary was also provided of the additional work done to prepare for the transition to the proposed mechanistically-based 2002 AASHTO Guide. The paper focused only on the design of flexible pavements in terms of load characterization using equivalent single axle loads along with axle load spectra, below grade and material characterization, plus initial and terminal serviceability and reliability. #Flexible pavement design aashto example plus# The AASHTO Guide uses two parameters to deal with design reliability: design reliability level and overall standard deviation. Data collected on Ontario highway pavements and materials was used for assessing the design inputs. Other data was also collected from research and development studies, laboratory experiments, and from a survey of experienced pavement design engineers. The end result was a new grouping of Ontario soils for pavement design, recommended values for the resilient modulus of below grade soils, recommendations for structural layer coefficients for Ontario pavement materials and recommendations for the initial pavement serviceability based on Ontario smoothness specifications. Results of calibration and verification processes indicate that for new flexible pavements, the AASHTO-Ontario model is in good agreement with the observed results. #Flexible pavement design aashto example verification# #Flexible pavement design aashto example plus#.#Flexible pavement design aashto example verification#.
0 kommentar(er)
